🎉 All generations are free through December 31 — design your lettering and appliqué, get your DST and PES files, no payment needed.
ThreadType

What Is a DST File? The Embroidery Format Explained

Updated November 17, 2026 · 4 min read

A DST file is an embroidery stitch file in the Tajima format. It is a list of needle moves: where every stitch goes, where the machine jumps without stitching, and where it should stop for a color change. It is the most widely read embroidery format, which is why it is the safe first choice when you are not sure what your machine accepts.

What does a DST file contain?

A short header (the design name, the stitch count, the number of color changes and the design’s size) followed by the stitches themselves. Each stitch is stored as a small move from the previous one, in steps of 0.1 mm. Jumps (moves without stitching) and color-change stops are stored as special commands in the same list.

What a DST file does not contain

  • Thread colors. A DST file only says that the machine should stop and change thread. Software that opens it shows made-up colors until you choose real threads, so a DST that looks like the “wrong colors” on screen is normal. Judge it by its shape and its stops.
  • Fabric, hoop or machine settings. Those come from your machine and your software, not the file.
  • A dedicated trim command. DST has no trim command of its own. Digitizing software adds several jumps in a row, and many machines treat that as a thread cut.

Which machines read DST files?

DST is the Tajima format, and it is read by Tajima, Barudan, Ricoma and most other commercial and multi-needle machines, as well as many home machines and almost every embroidery program. Brother and Baby Lock home machines normally read PES, and Melco machines read EXP, so check your manual for the formats your machine lists. If you are not sure, DST is the one to try first. The full comparison is in DST vs PES vs EXP: which file type do you need?

How do I open or view a DST file?

  1. On your machine: copy it to a USB stick or send it over the network as your manual describes. Use a short file name without special characters and keep it in the top folder of the stick.
  2. In embroidery software: open it to see the design, check the size and, if needed, save it in another format.
  3. In your browser: the free DST viewer opens DST, PES and EXP files without installing anything. It plays the stitching in order and shows the size, stitch count, color changes, trims and longest stitch. The file stays on your computer and is never uploaded.

Can I resize a DST file?

A little, but not much. The stitch count and density are fixed in the file, so scaling it up or down by a large amount makes the stitching too thin or too dense. It is better to make the design at the size you want in the first place. A single stitch in a DST file also cannot be longer than about 12 mm, so longer moves are stored as several jumps.

Common problems with DST files

What you seeLikely causeWhat to try
The machine does not show the fileThe machine does not read DST, or the name, folder or USB stick is the problemCheck the formats in your manual; use a short plain file name in the top folder of the stick
The colors look wrong on screenDST stores no thread colorsNormal: choose your own threads at the machine or in software
The design is too big for the hoopThe real size is larger than the sewing fieldCheck the width and height in the viewer before you stitch
Long thread lines across the designJumps that were not trimmedSet trims in your machine or software, and trim after each stage
Tip: Every order on ThreadType includes DST, PES and EXP, so you do not have to choose in advance. Use whichever format your machine reads.

Check it before you stitch

Whatever the format, look at the file before you sew it and test on scrap fabric. See how to check an embroidery file before you stitch. If you are working with a Melco machine, see what an EXP file is.

Keep reading

See all embroidery and appliqué guides.